Free Domestic Shipping
One Year Limited Warranty
Designed in the USA

Big Butane Torch-926

Sure. It is the best torch for cooking or soldering.

The torch can create a continuous flame up to 6 inches long with a temperature of 2500°F. You can use this torch for soldering jewelry. But the flame tip may product a flame front too large for small jewelry. We suggest that you can consider our small torch lighter.


- Please double check if the torch is sparking. You can do so by clicking the Piezo ignition button and looking down the nozzle of the torch. MAKE SURE THE GAS FLOW REGULATOR IS SHUT OFF. 


- If the torch is sparking, turn the gas flow regulator knob counter-clockwise and listen for the sound of gas flowing. 


- If the torch is sparking and has gas flow, try lighting the torch when the gas flow is high. Once the torch is lit, turn the gas flow regulator off, and attempt to light the torch at any level of gas flow. 


- If none of these suggestions resolve your issue please contact us. We are here to help!

- Please ensure that you are using butane fuel with the universal fueling tip (long) and not the shorter butane fueling tip. Zippo and Ronson Multi-Fil both have the universal fueling tip. To fill the torch, turn the torch upside down and press the fueling tip into the gas filling valve. Make sure the fueling tip is pressed straight down and not at an angle. In 10 seconds the tank should be full. 


- If the gas filling valve is leaking when you are filling it, slow down the rate you are filling the torch to allow the fuel to redistribute in the fuel tank.


- If none of these suggestions resolve your issue please contact us. We are here to help!

TL- Honest/ Jobon Lighter-450/392

Blue Bullet Lighter-596

2 PACK Triple Lighter-806

Hard plastic. Not easy to break, easy to put in the pocke.


If none of these suggestions resolve your issue please contact us. We are here to help!




Manual lifting. You flip it up with your thumb. very safe.


If none of these suggestions resolve your issue please contact us. We are here to help!


No you do not need a screwdriver to refill or adjust. Flame adjustment knob at the bottom. It is very easy to adjust the flame size with one hand.


If none of these suggestions resolve your issue please contact us. We are here to help!

Sapphire Blue Lighter-692

No, ZOOCURA is colored by electroplating, the color will not fall off.


If none of these suggestions resolve your issue please contact us. We are here to help!

You will need to buy the butane fuel for it. Too flammable to ship with fuel in it.


If none of these suggestions resolve your issue please contact us. We are here to help!

  1. Exhaust the air in the lighter first, press the air inlet at the bottom of the lighter with a screwdriver to exhaust the air.

  2.  The valve that adjusts the flame size can not be closed or opened to the maximum. The lighter is inverted and the gas bottle is shaken for a few times.

  3. Then turn the inflatable bottle upside down and connect the inflator hole of the lighter. Press hard to inflate. Pay attention to pressing tightly, otherwise there will be gas leakage. Inflate for about 5 seconds each time. Three or four back and forth times are enough.  When the gas overflows, it means it is full and cannot be Inflatable. 

  4. Take the lighter upright and complete the inflation. Let it sit for a few minutes after inflation. 


If none of these suggestions resolve your issue please contact us. We are here to help!

Activate Your Warranty and Have a Chance to Claim Gift!
Register within 14 days after receiving the product to get free 8-Month NO-RETURN-NEEDED replacement warranty and VIP customer support service.
Enter Your Amazon Order ID

* We respects your privacy and is committed to safe guarding the personal info that you provided to us.

* If you encounter any technical issue upon registering, welcome to send your inquiry to our mailbox: Zoocura@outlook.com